Toll Free Help/Orders: 1-866-505-4335
|
Godlyke Products
|



 |
Godlyke Power-All 9-volt Digital Power Supply:
The world’s first high-current digital power supply, the Power-All was specifically designed for guitar effect users by guitar effect users. The Power-All provides clean, consistent, noise-free power with an energy efficiency rating that archaic transformer-based adaptors just can’t match.
The Power-All has recently been upgraded to provide a whopping 2000 milliamps of current to meet the demands of today’s complex pedalboards and digital multi-effects. The improved Power-All also features additional noise filtering circuitry and a longer, 10 foot power cable to power your pedals more quietly and effectively.
As all players’ needs are not the same, the Power-All is now available in three different configurations – PA-9S (Supply Only), PA-9B (powers 5 effects) and PA-9D (powers 11 effects). Often imitated but never matched, the Power-All’s simple-yet-ingenious kit configurations include color-coded cables that provide clear, concise connections for your effects.
Featuring professional-grade construction designed to withstand the rigors of the road, Godlyke is so confident that the Power-All is superior in design and construction to any other digital power supply on the market that it comes with a lifetime manufacturer's warranty – if anything ever goes wrong with your Power-All, Godlyke will replace it at no charge to you!
The PA-9UK/PA-9UKD offers all the great features of the original PA-9 Power-All, but with three-prong UK/Hong Kong connector and CE approval for use in the United Kingdom and Hong Kong.
The PA-9ED offers all the great features of the original PA-9 Power-All, but with the standard mainland European connector and CE approval for use in Europe.
Power-All Operating Instructions
Power-All Compatibility Chart
Each PA-9D PA-9ED, and PA-9UKD Power-all System includes ALL of the following:
- 1 Power-All 9 VDC, 2000 milliamp digital power supply
- 1 Cable-11R eleven-connector right-angle Daisy Chain with spring-loaded jacks for extra secure connections – no more losing power mid-solo!
- 1 Cable-Blue/R right-angle 3.5 mm Phone Plug Jumper Cable for use with EH and other vintage pedals
- 1 Cable-Green Line-6 Jumper Cable with spring loaded jack for use with Line 6 Modelers and other pedals requiring a 2.5 mm internal diameter jack
- 1 Cable-Green/R right-angle Line-6 Jumper Cable
- 1 Cable-Grey Battery Clip Jumper Cables for pedals with no AC input
- 1 Cable-Red/R right-angle Reverse Polarity Jumper Cable with spring-loaded jack for powering tip positive pedals
- 5 Cable Cap insulator sheaths (to cover power leads when not in use)
- LIFETIME MANUFACTURER'S WARRANTY – never buy another power supply!
- Power all your pedals from a single power supply
- Takes up only one outlet space
- Replaces Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro DA-1, Dunlop ECB-003, Ibanez AC-109, Guyatone AC-2, Maxon AC210N, Zoom AD-0006 and just about any other 9 VDC power adaptor
- Special, low-noise circuitry reduces ripple current and hum
- Ferrite-core filter module on power output cable reduces noise and hum
- 10-foot power cable eliminates need for an extension cord
The Power-All Basic (PA-9B) System includes ALL of the following:
- 1 Power-All 9 VDC, 2000 milliamp digital power supply
- 1 Cable-5 daisy chain connector
- 1 1/8" (3.5mm) phone plug jumper cables (Blue)
- 1 barrel-type reverse polarity jumper cables (Red)
- 1 battery clip jumper cables (grey)
- 1 Line 6 Modeler Cable (Green)
- 3 Cable Cap insulator sheaths (to cover power leads when not in use)
- LIFETIME MANUFACTURER'S WARRANTY – never buy another power supply!
- Power all your pedals from a single power supply
- Takes up only one outlet space
- Replaces Boss PSA-120, DOD PS-200R, Morley 9V, DanElectro DA-1, Dunlop ECB-003, Ibanez AC-109, Guyatone AC-2, Maxon AC210N, Zoom AD-0006 and just about any other 9 VDC power adaptor
- Special, low-noise circuitry reduces ripple current and hum
- 10-foot power cable eliminates need for an extension cord
Our Price: $22.50 & up
|
 |
Godlyke Power-All Iso-Pump Voltage Converter:
Not all effect pedals run off 9 volts, and for these oddball units there’s the Iso-Pump Voltage Converter. Designed to work specifically with the PA-9 Power-All, the Iso-Pump takes 9 VDC and converts it to 12, 18, or 24 VDC, selectable via an external switch. With the Iso-Pump, pedals requiring 2 batteries, pedals with internal vacuum tubes, and many digital units can be powered directly off the PA-9 without the need for a separate power supply. The Iso-Pump can also be used to get more headroom out of certain overdrives. Best of all, the Iso-Pump features Godlyke's proprietary “Ground Hound” ground isolation technology which allows use of pedals with opposing ground configurations to be powered off the same series power supply!
Our Price: $30.00
|
 |
Godlyke Power-All Daisy Chain Cables:
Now available with your choice of straight or right angle connectors, in 2-tap Y cable, 5-tap, and 11-tap configurations (angle plugs only), this is a Daisy Chain connector with standard
polarity (tip negative/barrel positive) jacks that is used to connect the PA-9 Power-All to multiple 9-volt effect pedals.
They can also be used with Power-All adaptor cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.).
Link multiple Daisy Chain connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current
draw of individual units used). Jacks: Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 22 mm.
Our Price: $7.50
|
 |
Godlyke Power-All Black Extension Cable:
Available in either straight/straight or angle/straight configurations, the Cable-Black allows users to power over-sized effect units or units w/AC jacks in hard-to-reach places. The Cable-Black is 21 cm long from jack to jack and can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself.
Our Price: $3.00
|
 |
Godlyke Power-All Blue Phone Plug Cable:
Included in the Power-All System and also sold separately, the Cable-Blue allows users to power effect units that use a 1/8" phone plug connector with tip-positive polarity. The Cable-Blue can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself. Note that to achieve tip-negative polarity from the Cable-Blue, simply attach a Cable-Red in between it and the power source.
Our Price: $3.00
|
 |
Godlyke Power-All Grey Battery Clip Cable:
Included in the PA-9 Power-All System and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that do not have an external AC power jack. The Cable-Grey hooks directly to the unit''s Battery Clip and can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself.
Our Price: $3.00
|
 |
Godlyke Power-All Line-6 Modeler Cable:
Included in the Power-All system and also sold separately, the Cable-Green allows the user to power Line-6 Stomp-Box modelers from the PA-9. The Cable-Green features a reverse-polarity barrel connector with a smaller internal diameter designed specifically for use w/Line-6 Modelers. the Cable-Green can be connected to any jack on the Cable-5 Daisy Chain or directly to the PA-9 itself (note that the PA-9 can power up to three Line-6 Modelers while still having power remaining for other effect units).
Our Price: $3.00
|
 |
Godlyke Power-All Red Reverse-Polarity Cable:
Included in the Power-All System and also available separately, the Cable-Red allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red can be hooked to any jack on the Cable-5 daisy chain or directly to the PA-9 itself.
Our Price: $3.00
|
|