George L's Cable Products
|
Make a cable in seconds, clean up that tangled pedalboard, or redo your rack in minutes. It's easy and fast if you use George L's Solderless Plugs and Cable. Your cable makes the difference in how your performance is rated for sound.
Enjoy the sound of your instrument without the noise and buzz that outside interference can cause. George L's special anti-stat in the cable reduces the microphonics and allows your music to flow without the problems of hum, buzz, or microphonics while you play. Have you ever stepped on your cable while playing and broken the connection to your plug? This problem is easily remedied with George L's solderless connection cables. Just reapply your plug, tighten down the set screw and you're done in seconds!
You will always sound your best with George L's Solderless Plugs and Cable. So if you want to rewire your studio or play like the pros, we have the cable and plugs to fit your needs. Remember, your instrument is only as good as the cables that carry your music to the ears of your fans. High quality is what made George L's famous and now you too can master the art of superb audio recognition.
"It's my favorite cable ever made for guitar! " -Eric Johnson
Voted #1 for sound clarity by Guitar Player Magazine, Sept. 1997
|
 |
George L's Cable - By the Foot:
We carry both the lighter .155 cable for pedalboard/studio wiring, as well as the heavier .225 cable for making longer stage-friendly cables. The .155 cable is now available in blue, white, black, red, and purple; the .225 is available in black or red. You will always sound your best with George L's Solderless Plugs and Cable. So if you want to rewire your studio or play like the pros, we have the cable and plugs to fit your needs. Remember, your instrument is only as good as the cables that carry your music to the ears of your fans.
|


|
George L's Plugs:
Available in .155 and .225 gauges, in straight, stretch (for Strat type guitars), and right angle configurations, and in plated, unplated (brass), and gold finishes. We also have .155 and .225 gauge RCA-type audio pin plugs in plated finish.
|
|
George L's Stress Relief Jackets:
Available in both straight and right angle versions, and in a large variety of colors. Please Note: Straight Stress Relief Jackets are made for .155 cable, however you can trim the top of the jacket (at the taper) to accommodate the .225 cable. The jackets cannot be used on speaker plugs. Right Angle Stress Relief Jackets will work on both .155 and .225 diameter plugs.
|
 |
George L's Effects Board Cable Kits:
A pre-packaged kit containing 10 feet of George L's .155 cable, 10 right angle plugs, and 10 right angle strain relief jackets in your choice of:
- Black Cable with Plated Plugs and Black Jackets
- Vintage Red Cable with Unplated Plugs and Black Jackets
- Blue Cable with Gold Plugs and White Jackets
|
|
George L's Cable Checker:
Pocket size 2 5/8" X 3/4" with limiting resistor for extended battery life. Simplifies continuity checking and accepts most type plygs. LED Indicator. Equipped with 2 AA replaceable batteries. Simple design!
Our Price: $25.99
|
 |
George L's Screwdriver:
Just the right fit to work on your George L plugs. Fits the set screws perfectly. Colors vary.
Our Price: $7.29
|
|
George L's Cable Cutter:
It is the best shear cutter around for making those straight clean cuts. It’s heavy duty and light weight for many years of use.
Our Price: $9.99
|
|
George L's Cable Kit:
Everything you need to make your custom George L’s Cables! This heavy duty leatherette wallet comes with a Cable Checker, Cable Cutter, Screwdriver, some George L Guitar Picks, and some angle & straight Stress Relief Jackets. It also has room for a set of guitar strings, batteries and other little necessities (not included). The George L's logo is also embroidered on the front of the kit to let others know you play with the best!
Our Price: $64.99
|
Instructions for Assembling George L's Cable & Plugs
Straight Plugs Assembly:
- DO NOT STRIP CABLE.
- Cut with a sharp instrument. Make it straight and clean.
- Back set screw out, far enough to allow cable to pass.
- Put plug on cable and push plug on to the needle. This is your hot connection.
- Tighten set screw down to touch the cable. Then tighten the screw 1 1/2 - 2 rotations. This is the ground connection.
Right Angle Plugs Assembly:
- DO NOT STRIP CABLE.
- Cut with a sharp instrument. Make it straight and clean.
- Remove cap from right angle plug
- Push cable onto the needle. DO NOT FORCE, and HOLD CABLE WITH YOUR THUMB.
- Bend cable enough to start screwing the cap back on. Let the twisting of the cap bring the cable down.
- Screw cap down completely to create the ground.
|